Collomix Rühr- und Mischgeräte Gmbh
Shaker
V
IBA
15
&
V
IBA
25
D-85080 Gaimersheim
Edition
2.3-05
23
7.4.8
Switching on the shaker motor (SHAKER MOT)
If the container moves during mixing in the mixing unit you will need to increase the
clamping pressure. If the container becomes deformed you will need to reduce the
clamping pressure (see 7.4.6 and 7.4.7)
SHAKER MOT OFF
ON OFF
•
The motor can be switched on once a container
is clamped in place.
•
•
Press button "II" - ON – to start the motor
•
SHAKER MOT ON
ON OFF
•
The motor runs until you press button "III" – OFF.
•
•
SHAKER MOT OFF
ON OFF
•
•
Press button “E“ to call up the next menu point.
•
7.4.9
Saving changes (SAVE TO EPROM)
New values are not adopted until they are saved with button III (SAVE).
If you do not want to adopt the changes, switch off the machine with the main switch
without actuating the save function. The "old" values (previous settings) will then be
retained.
•
SAVE TO EEPROM
SAVE
•
Save the entered values by pressing button III
(SAVE).
•
•
TEST OUTPUTS
M_DOOR
•
The first menu point is displayed.
The service menu can be closed.
•
