Collomix Rühr- und Mischgeräte Gmbh
Shaker
V
IBA
15
&
V
IBA
25
D-85080 Gaimersheim
Edition
2.3-05
7
3.
Safety instructions
For your own protection, read the safety instructions carefully and follow them
exactly.
Observe the electrical regulations in force at your company and those listed in this
manual when you install the machine.
Wear safety shoes when installing or relocating the machine.
Make sure the machine stands securely.
Keep your work place tidy. There is a higher risk of accidents at an untidy work place.
Consider ambient conditions. Do not install the machine in damp rooms. Provide good
lighting and good access.
Keep third parties away from your work place.
Close the machine when it is not being used. Projecting parts may injure you and
others.
Take care of the power cable. Make sure it is laid neatly and where it cannot be
damaged. Protect the cable in particular from heat, sharp edges, oil and acid. Check the
cable and plug regularly for signs of damage. Use only suitably approved extension
cables and plugs.
Do not overload the machine. Check that the weight and dimensions of the
mixing container are suitable.
Never lift large and heavy containers into the machine by yourself.
Use only undamaged and sturdy mixing containers. If you don't, the container may burst.
The mixing container has to be closed completely.
Make sure that the mixing container sits in central position on the mixing table.
Secure the container handles with rubber bands or adhesive tape.
Take good care of the machine. Make sure that the moving parts move smoothly and
without restriction. Remove any dirt immediately. Follow the maintenance instructions.
Do not use high-pressure equipment to clean the machine.
Make sure that the safety devices work properly and are clean.
Do not use the machine if the door or the acrylic glass window is damaged. If the
acrylic glass window is broken, do not reach into the interior! There is a high
risk of injury from rotating components.
Do not start the machine with the housing open. Pull out the power plug! There
is a high risk of accidents!
Before switching on the machine after maintenance work, check that no wrenches or
setting tools are left inside the machine compartment.
Examine the machine for signs of damage. Check regularly that all parts are in good
working order. Have repairs carried out only by the manufacturer or an approved
specialist.
