6
Setting up the Stopwatches
Follow these steps for each watch to be used at a meet:
1.
Turn the watch on (press and hold the Reset button).
2.
Enter the menu (press and hold the Reset button and either of the side
buttons).
3.
Once in the menu, the first setting is LANE. Press a side button to
change the lane for this watch, and then press Reset to advance to the next
menu option.
4.
Press a side button to select the TIMER for this lane (A, B or C), and
then press Reset to advance to the next option.
5.
Press a side button to select the channel number. This MUST match
the channel on the starter and the base.
6.
Press Reset to exit the menu.
Watches will show up on the Dolphin screen when set.
Regular Operation
This section describes the regular operation of the Dolphin system at a meet.
There are separate instructions for the Computer Operator, the Starting Official, and the Lane
Timers, describing only what that individual needs to do. This way, each can refer to his or
her specific section to know what to do. Many facilities find it useful to print extra copies of
Starting Official and Lane Timer pages to use in training those individuals. This manual is
available on the customer service section of our website (www.coloradotime.com).
Computer Operator Instructions
There are two ways Dolphin can be used as far as meet management software is concerned:
standalone, or with a sports timer. Follow the instructions for the method your facility is
using.
Dolphin Screen -- DO NOT CLOSE THIS WINDOW while using Dolphin. It’s OK to minimize it.
Summary of Contents for Dolphin
Page 1: ...User Guide F912 Rev 201710 For Dolphin version 4 3 ...
Page 4: ......
