20
Scoreboard Adapter Programming Procedure
1.
Download the update files from coloradotime.com. Note the version number(s).
2.
Update the Base Unit (see instructions on the other side of this page).
3.
Update the Scoreboard Adapter:
a.
Make sure all Dolphin watches and the starter are turned off.
b.
Make sure that the scoreboard is turned off/unplugged
c.
Plug your Dolphin
Base
unit into your computer using the USB cable
provided.
d.
Connect the scoreboard adapter to the scoreboard.
e.
Open the Dolphin software.
f.
Enable the Scoreboard:
i.
Click the Scoreboard settings button
ii.
Click the Scoreboard Enabled box
iii.
Close the Scoreboard Interfaces dialog box
a.
Click on “CTS Dolphin version” in very small type at the bottom of the page.
iv.
Click Update Scoreboard Code and browse to the firmware file in
C:\CTSDolphin\firmware. Select the scoreboard code (SBxxx.DDC).
Click Open, but DO NOT click Upload yet.
The next step needs to be done very quickly, as there is a short window of time
during which it will work.
v.
Turn on/plug in the scoreboard
vi.
Quickly click Upload.
vii.
Allow the upload to complete. The screen will display status.
b.
Exit Dolphin.
c.
Disconnect the scoreboard adapter from the scoreboard.
d.
Disconnect and reconnect the base.
e.
Reconnect the scoreboard adapter to the scoreboard.
f.
Finally, restart Dolphin. The new revision of the scoreboard adapter will
display on the scoreboard, along with the channel.
Summary of Contents for Dolphin
Page 1: ...User Guide F912 Rev 201710 For Dolphin version 4 3 ...
Page 4: ......
