Cable Harness and Deck Plate Sockets
Materials Needed
100% Cotton Pipe Cleaners (available at most drug stores)
Lime-A-Way
Kitchen/Bathroom Cleaner (available at most grocery stores)
Water
Dow Corning
#111 Silicon Grease or equivalent (available at most hardware stores)
NEVER USE A SHARP OBJECT TO CLEAN SOCKETS OR CONNECTORS
1) Dip pipe cleaner folded in half in Lime-A-Way
Kitchen/Bathroom
Cleaner and twist into socket.
2) Clean thoroughly by rotating the pipe cleaner in the socket.
3) Use water to completely rinse the socket.
4) Next, use a clean, dry piper cleaner to soak up excess water in the
socket.
5) Apply a small amount of silicon grease to a clean, dry pipe cleaner or
cotton swab and twist into the socket.
If you have the quick connect deck plate with speedlight connector (pictured above),
clean speedlight connector
with rubbing alcohol only
. DO NOT USE LIME-A-WAY
Kitchen/ Bathroom Cleaner.
Cleaning Deck Plates, Cable Harnesses
and Wall Plates
BUTTON
PRIME
Pipe Cleaner
Cable Harness
Deck Plate (Quick Connect)
Cleaning sockets
