3
Maintenance
If heater fails, please contact supplier in the first instance for advice.
•
Before commencing any maintenance / cleaning, please disconnect power supply.
•
For optimum efficiency, we recommend that, every approximate 100 hours of usage,
the heater glass and reflector should be cleaned internally with a soft cloth.
•
This heater is fitted with toughened safety glass.
Replacing emitter.
1.
Ensure power supply is disconnected, and heater body and emitter are cool.
2.
Unscrew the 4 screws at back of casing.
3.
Open front hinged cover.
4.
Emitter is simply removed from spring holders by pushing it to one side and removing.
5.
Refit in reverse order.
6.
Contact supplier for replacement emitter.
Please Note:
Emitter should not be handled with bare hands / fingers. Finger marks
should be removed using a soft, lint free cloth and methylated spirit.
Finger marks can burn into the emitter causing premature failure.
