background image

 

IMPORTANT INFORMATION   

Read carefully this instruction manual before using the infrared heater.   

This instruction manual contains important information on your safety, as well as some recommendations 

on proper use of the appliance and its maintenance.   

Keep the instruction manual along with the warranty certificate, sales receipt, and, if possible, cardboard 

package and packing material.   

The purchased infrared may somewhat differ from one described in the manual, but this does not affect 

the methods of use and operation.   

Important  precautions  and  instructions  given  in  this  Manual  do  not  include  all  possible  modes  and 

situations, which can be encountered. It is necessary to understand that common sense, cautiousness, 

and carefulness are the factors, which cannot be "integrated" to any product. 

 

 

1. SAFETY INSTRUCTIONS 
 

  Read the instructions before using. During use of the infrared heater, it is necessary to observe some 

precautions. Improper operation with disregard of precautions may result in infliction of harm to health 

of the user and other people, as well as in infliction of damage to their property.   

  Use only the voltage specified on the rating plate of the heater. 

  Connect the appliance ONLY to a properly installed socket-outlet with earth contact.   

  The heater should be connected to the electric mains equipped with an automatic circuit breaker. 

  The unit must be handled with care, and avoid vibration or hitting. 

  WARNING:  FIRE  RISK  EXISTS  IF  THE  HEATER  IS  COVERED  BY  ORPOSITIONED  CLOSE  TO 

CURTAINS OR OTHER COMBUSTIBLE MATERIALS.   

  Do not use the appliance areas where gasoline, paint or other flammable liquids are used or stored. 

  Do not use the appliance in particularly duty and explosive areas. 

  Do not use the appliance in a building site, green house, barn or stable where there’s flammable dust. 

  Do not use the appliance as a sauna heater. 

  Warning: Do not touch the radiating plate. To avoid burns, do not touch the appliance surface by hand 

and other body  parts.  It  is  also necessary  to  exclude  the possibility of  touching  the  heater  radiating 

boards  by  a  person  (including  accidental)  via  proper  instructions  and  allocation  of  the  heater  in  an 

inaccessible place. 

It keeps hot for a period after shut down. Potential danger would be occurring when touching it during 

this period. 

  Do not place any items of clothing, hand towels or similar over the heater to dry. Risk of overheating 

and fire hazard. 

  Do not leave the heater unattended whilst in use. 

  Do not use this heater on a wet surface, or where it can fall or be pushed into water. 

  Do not touch an appliance that has fallen into water. Switch off at supply and unplug immediately. 

  If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly 

qualified persons in order to avoid a hazard. 

  If the heater is defective, it must be checked and repaired by the manufacturer, its service agent or 

similarly qualified persons in order to avoid a hazard. 

  Do not operate appliance with wet hands. 

  Use  this  appliance  only  as  described  in  this  manual.  Any  other  use  is  not  recommended  by  the 

manufacturer and may cause fire, electric shock or injury. 

  Do not use abrasive cleaning products on this appliance. Clean with a damp cloth (not wet) rinsed in 

hot soapy water only. Always remove plug from the mains supply before cleaning. 

  The heater must be installed at least 1.8 m above the floor. 

  The heater must not be located immediately below a socket-outlet. Socket-outlet should not be located 

Summary of Contents for CLHR-20WR








Reviews: