User Manual
19
Properly Using the Data Cable and Power Adapter
Use the power adapter provided with the tablet. Adapters for other electronic devices may
look similar; however, they may pose negative impact on or even damage your tablet.
Do not disassemble or modify the power adapter. Do not use the power adapter when it is
damaged. Otherwise, electric shock or fire may be caused.
The power adapter gives off heat when it is used. Keep the surrounding of the power adapter
ventilated, and put the power adapter away after the charging is complete. Place the power
adapter on a hard and flat surface, if possible, to allow the power adapter to well give off
heat.
Do not touch the power adapter with wet hands. If the power adapter comes in contact with
water or other liquid, cut off the power immediately.
Do not short-circuit the power adapter. Do not shake or mechanically vibrate the power
adapter. Do not expose the power adapter to direct sunlight. Do not use the power adapter in
high humidity places such as the bath room. Do not expose the power adapter to rain or
moisture.
Do not use the power adapter near electrical appliances such as TV set and radio set.
Hold the power adapter instead of pulling the power cord when pulling the plug. Otherwise,
the power cord may be damaged.
Place the power adapter in a place out of children's reach, to prevent safety ricks.
Ensure that the data cable matches the micro USB port and that the data cable is connected to
the micro USB port at the correct end.
Keeping the Tablet Exterior Clean
Ensure that the tablet is turned off. Use a soft and lint-free cloth. Keep openings from moisture.
Do not use cleaning products such as spray, solvents, alcohol, or abrasives.
