3. when the "Enter" key is pressed, the "Confirm New Password"
window will appear, and again the password is entered to confirm the
correct password. If the "Invalid Password" prompt information is
presented, a mistake is entered when the password is confirmed, and
reoperation is required.
4. if you want to change the password of the system administrator,
please run the password settings again according to the above
program.
5.after the "F10" key to save the exit, password settings can be
effective.
User Password
This option is used to set the common user password. Select the "User
Password" project and press the "Enter" key, and the rest of the steps
refer to the system administrator password to operate.
Note:
the password of the administrator and the user password: 1.
Supervisor password: can enter and modify the BIOS setup
program. 2. User password: can be entered, but no right to modify
a part of the BIOS setup program. 3. if you forget to set the BIOS
password, you can clear the CMOS to solve it.
53
ＢＩＯＳ Ｓｅｔｔｉｎｇ
