3
1. General notes
The hand operated unit of the VitoMat assortment for filling of aerosol cans is used for the
quick and easy filling of pre-filled ColorMatic cans with lacquer. The cans are already filled
with propellant and solvent.
1.1. VitoMat I consists of:
Outside:
•
Chassis made from stainless, high quality steel with
safety door
•
Control elements and monitoring display
•
Stand panel
•
Filling
lever
Inside:
•
Movable lifting device with pressing-on plate for the can
•
Cylinder for the colour and holding device
•
Movable piston and adapter for the filling
Dimensions: 32 x 25 x 75 cm
1.2. Advantages of VitoMat I
:
•
Every customer gets the desired colour he wants within a short time even for just one
can.
•
The machine is easy to use.
•
The piston is detachable and not fixed, therefore a longer defensibility.
•
Easy to clean and maintain.
•
Adjustable pedestals and handhold for transport
•
The bottom part can be screwed to the place of employment
•
Requires little space, relatively low weight
•
High working security by solid construction and easy handling
•
Short filling times
•
Quick amortisation by low prime cost
1.3. Advantages of using a CleanJector
•
Parts which have contact with laquers don’t have to be cleaned
•
Thereby less contact of the skin with harmful solvent
•
Shortened filling times
•
Reduces solvent and allows a quicker colour change
•
Filling piston and filling cylinder are from now on free from wear
