background image

 

 

8

8. Accessories and spare parts  

 
 
Cylinder 723452 
Piston 723476 
Adapter 723483 
Set: cylinder/piston/adapter for 400ml: 

878763 

Accessory for the filling of 150ml cans: 

254970 

Adapter for 150ml cans: 

254987 

 
 
Clean Jector rebuild-set (metal cy metal piston)  226540 
Clean Jector 72 pc.: 

225031 

 
 
 
 
 
 

225031 
CleanJector 

226540 
CleanJector rebuild-set 

 
 
 
 
 
 
 

9. Liability 

 
The term of liability for the operability of the machine is one year. The guarantee is not 
applicable at incorrect using and mechanical damage. Also if the customer doesn’t use 
original spare parts or accessories. 
 

The manufacturer doesn’t take responsibility in the following cases:  

 

  If the filling machine is used for another purpose then the filling of pre filled 

ColorMatic cans. 

  The machine wasn’t installed according to the rules. 

  If maintenance work wasn’t done correct 

  If the machine was rebuilt 

  Not using original spare parts 

  On non-observance of the operating instructions 

 

 

10. Address 

 
MOTIP DUPLI GmbH 
Kurt-Vogelsang-Str. 6 
74855 Haßmersheim 
 
Phone: ++49 (0) 6266 75-0 
Fax: ++49 (0) 6266 75-340 
 
P.O. Box 1140 
74851 Haßmersheim 

Summary of Contents for VitoMat I









Reviews: