41
CityTab
Vision 7”i
MicroSD memory card installation*
The device can read files from memory cards (microSD).
To install a memory card:
1. Insert the card in the correct position into the slot located on the device’s edge.
2. Access to files stored on a memory card is possible after opening the file explorer
by tapping the „File Explorer” icon and then choosing the „external_sd” catalogue.
Note:
„SDCard” folder stands for the device’s built-in memory, not a microSD card.
SIM card installation*
The device requires a SIM card to operate a mobile network. It is used for telephone
communications and 3G Internet connections.
To install a SIM card:
1. Turn the tablet off.
2. Insert the SIM card in the correct position into the slot located on the device’s edge.
3. Turn the tablet on and configure the 3G connection if necessary.
Note:
Pay particular attention to correct positioning of the SIM card when inserting.
Turn the device off before inserting or removing the SIM card.
Reset
If the tablet does not respond to commands, it must be reset:
1. Press and hold the power button until the tablet is completely off.
2. Wait a few seconds and turn it on again.
Software update
Software updates remove errors and problems with software, extend it with new
functionality, and increase user data safety. Check regularly for updates and install
them immediately.
1. Go to http://colorovo.eu and find your tablet model in the Support section.
2. On the „Downloads” tab, check for new updates available for your tablet.
3. Install these according to the guidelines available on the website.
CT Vision 7i Manual.indd 41
25.07.2014 14:41
