Version 1.00
32
Global Scanning UK Ltd © 2018
Configuring the scanner’s devices
•
The scanner can select a different printer for copying, or PC for scanning, for each individual
operation. By default, the scanner will auto search for available devices on a per Copy/Scan
basis. The scanner can auto search for up to a maximum of 15 printers or 15 PCs on the
subnet.
•
It is recommended to assign all devices numbers and set a preferred device, to prevent the
scanner having to complete an Auto search before each operation. To achieve this, the
scanner must first discover the available devices and assign them numbers. A list of
discovered devices is stored on the scanner and re-established when the scanner is powered
on. This list consists of MAC addresses which means it does not matter if the PC or printer
has a new IP address next time around. The scanner can define numbers for a maximum of 9
printers or 9 PCs on the subnet.
Configuring the Printers
•
To define the printers, we must first search for available devices on the network and assign
them number. The printer can then be selected by this number.
•
From the Home Page, select Scanner Settings.
•
Scroll and select iPF#.
