Version 1.00
78
Global Scanning UK Ltd © 2018
Scan Length Adjustment (Automatic)
The Scan Length is automatically adjusted when completing the Stitch Adjustment.
Scan Length Adjustment
To correct the length of scans or copies, Copy a document and measure the length of the
drawing on both the original and the copy. The copy should be within 0.2% of the original. So,
for a 500mm drawing, the acceptable range is 499mm to 501mm. To adjust the copy length:
o
Insert a document into the approximate centre of the scanner, face up. The exact
position is not critical as we will scan using Auto-Size. We will copy a document and
measure the length of both the original and the copy.
o
From the Home Page, select the Copy function.
o
Use the default Copy Settings: Colour mode, Standard Quality, Auto-size, Brightness=0,
BP=1, WP=1, Crop off, Scale=100%, Copies=1
o
Start the Copy.
o
The scanner will then transfer the scan data to the printer. Wait for the scan data to
complete the transfer to the PC when the hourglass will disappear and the original
document will be ejected from the scanner. Collect your copy from the printer.
