21.
©2010-2014 Colorverse, Inc. - All Rights Reserved
®
BluControl
™
PANEL
in detail (continued)
The fans will operate silently below 110F. When the fixture exceeds 110F, the fan speed will automatically
increase at a very slow rate. Conversely, the fan speed will decrease at the same rate.
FAN MODE:
In Auto mode the fan speed varies, based on the cooling needs of the fixture. This feature ensures long life of
the fans, and reduces the frequency that the fixture may need cleaning due to internal dust build up. When the
fixture is powered on, the fan will operate silently at the lowest speed. As the fixture core temperatures
increases, so will the fan speed. Conversely, when the fixture temp lowers, the fan speed lowers as well. The
change in fan speed occurs at a very slow, linear rate. This slow rate of change minimizes the audibility of the
fan speed change.
The fixture will remain relatively cool at an LED output of 75% or less. Operating at this lower output will also
extend the life of your LED lamps by thousands of hours.
The advanced Fan Mode within
offers three options for cooling:
AUTO
(default),
LOW
and
HIGH
.
This is a valuable and unique feature. In most applications, the default
AUTO
mode is recommended. However,
there may be applications where you may wish to choose
LOW
or
HIGH
speed fan mode. The fixture temperature
can be monitored at any time by choosing
TEMP
mode in the
BluControl
display. Just remember to exit
TEMP
Mode and return to your operating mode to resume normal operation. The
TEMP
mode can be helpful to
determine the best Fan Mode option. ...Remember, for most applications
AUTO
is the best option.
BluControl
™
*AUTO (default)
In this mode, the
will operate continuously at low speed and is
. This is a good choice where quiet
operation is critical due to certain environments such as a theater or house of worship. However, when operating in
LOW mode, it’s possible the fixture Temp may exceed the optimal operating temperature. This can happen if the
LEDs output remains very high for long durations, or if the fixture is operating in a high ambient location.
This may activate
‘High Temp Protection’ and automatically dim the LEDs. If this occurs, the
recommended action is to lower the output of your fixture to 75% output or less, or change the Fan Mode to AUTO
or HIGH. Review the section ‘
High Temperature Protection
’ for more details about this feature.
fan
near silent
BluControl’s
LOW
LED LAMP OUTPUT
100%
75%
66%
50%
33%
25%
0%
140F
130F
120F
110F
100F
90F
80F
Auto Fan Speed
(low, silent)
Auto Fan Speed
(high)
Fans run silent below 110F
BluControl
™
PANEL
in detail (continued)
Please note
The fixture can operate at full output for short periods without causing the fan speed to increase. This is due to
the delay feature in the fan speed circuit.
Summary of Contents for ColorVibe 108
Page 1: ...Model CV108 ...
