manualshive.com logo in svg

Colubris Networks CN3000, Administrator'S Manual

The Colubris Networks CN3000 Administrator's Manual is available for free download on our website. This comprehensive manual provides detailed instructions on how to configure and manage your CN3000 device. Get your copy today to maximize the performance of your network infrastructure. Download it from 88.208.23.73:8080.

Share
Download
background image

Chapter 18 - - - - - - - - - - - - - - - - - - - - - - -  Regulatory, wireless interoperability, and health information- - - - - - - - - - - - - - - - - - - - - - -   Chapter 18

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  416  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Regulatory information

The CN3000 complies with the following radio frequency and safety standards.

Canada - Industry Canada (IC)

This device complies with RSS 210 of Industry Canada.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 et CNR 210 
d’Industrie Canada.

Europe - EU Declaration of Conformity

This device is for indoor use only.

Important: 

Users must select the proper country of operation in the management tool 

to ensure wireless operational settings conform to local regulations.

Important: 

If more than one unit is deployed users must ensure that the operating 

frequencies are spread amoung different channels (according to channel availability).

USA - Federal Communications Commission (FCC)

The CN3000 complies with Part 15 of FCC Rules. Operation of the CN3000 in a system 
is subject to the following two conditions:

• This device may not cause harmful interference.

• This device must accept any interference that may cause undesired operation.

Caution: Exposure to Radio Frequency Radiation

The radiated output power of the CN3000 is far below the FCC radio frequency 
exposure limits. Nevertheless, the CN3000 should be used in such a manner as to 
minimize the potential for human contact during normal operation. When using this 
device in combination with Colubris Networks antenna products, a certain separation 
distance between the antenna and nearby persons has to be kept to ensure FR 
exposure compliance.

Refer to the Regulatory Statements as identified in the documentation that comes with 
those products for additional information.

When an external antenna is connected to the CN3000 it shall be placed in such a 
manner as to minimize the potential for human contact during normal operation. To 
avoid the possibility of exceeding the FCC radio frequency exposure limits, human 
proximity to the antenna shall not be less than 20 cm (8 inches) during normal 
operation.

When no external antenna is connected, the RF output power of the CN3000 is far 
below the FCC radio frequency exposure limits. Nevertheless, it is advised to use the 
CN3000 in such a manner that human contact during normal operation is minimized.

Interference Statement

The CN3000 has been tested and found to comply with the limits for a Class B digital 
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference in a residential installation.

The CN3000 generates, uses, and can radiate radio frequency energy. If not installed 
and used in accordance with the instructions, it may cause harmful interference to radio 
communications. However, there is no guarantee that interference will not occur in a 
particular installation.

Summary of Contents for CN3000



































































































































































































































































































































































































































Reviews:

No comments

Related manuals for CN3000

D-Link DWL-8500AP Administrator'S Manual preview
DWL-8500AP
Brand: D-Link Pages: 168
D-Link AirPremier DWL-7700AP Command Line Interface Reference Manual preview
AirPremier DWL-7700AP
Brand: D-Link Pages: 30
D-Link AirPlus Xtreme G DWL-2000AP Instruction Manual preview
AirPlus Xtreme G DWL-2000AP
Brand: D-Link Pages: 28
UNICOM WEP-72104G User Manual preview
WEP-72104G
Brand: UNICOM Pages: 56
Moxa Technologies AirWorks AWK-3131-RCC Series User Manual preview
AirWorks AWK-3131-RCC Series
Brand: Moxa Technologies Pages: 78
LevelOne WAP-6103 User Manual preview
WAP-6103
Brand: LevelOne Pages: 71
Rosewill RNX-N360RT Quick Installation Manual preview
RNX-N360RT
Brand: Rosewill Pages: 8
Comet Labs nr WRP64 User Manual preview
nr WRP64
Brand: Comet Labs Pages: 46
AirLive AAP-24005g User Manual preview
AAP-24005g
Brand: AirLive Pages: 50
Nortel Internet BWA System 3200 User Manual preview
Internet BWA System 3200
Brand: Nortel Pages: 68
Tycon Power Systems Wireless EZ-Bridge AC Manual preview
Wireless EZ-Bridge AC
Brand: Tycon Power Systems Pages: 20
AirLive AC.Top1 How To Set preview
AC.Top1
Brand: AirLive Pages: 6
Walmart WMBR-1 User Manual preview
WMBR-1
Brand: Walmart Pages: 4
Linksys WRT54GP2A-AT - Wireless-G Broadband Router Wireless User Manual preview
WRT54GP2A-AT - Wireless-G Broadband Router Wireless
Brand: Linksys Pages: 86
Deco X20-4G User Manual preview
X20-4G
Brand: Deco Pages: 59
ES EYE Dataflex HERA 600 Series User Manual preview
Dataflex HERA 600 Series
Brand: ES EYE Pages: 41
MISENSE MS-E8221 User Manual preview
MS-E8221
Brand: MISENSE Pages: 18
RFNet APRT-2801 User Manual preview
APRT-2801
Brand: RFNet Pages: 55

Brands by name

Popular brands

Load more brands