5100 SureTrans Versa Instructions
Revised: 7.05
C5100-00-00
4-4
3.
Place the bridge in position. Be sure that the bridge seats in the indent slots so that it is flat
with the top of the rails.
If the bridge will not fit
flat, check the height
adjustment on the
commode and shower
base. The height must
be the same on both
sections for proper bridge
fit and smooth transfers.
Warning: Never operate The SureTrans Versa System if the bridge is not seated
securely in place and flat with the commode and transfer base rails.
4.
To transfer the sliding seat, lift up on the
safety locking latch located behind the seat
and slide the seat to the desired position.
The seat is in position when it locks into the
safety lock latch on the other side of the
seat.
5.
The bridge can be removed during
use so the shower door or curtain can
be closed. Warning: Do not
remove the bridge unless the
safety lock is latched.
Cleaning Your SureTrans Versa System
Soapy water or mild cleansers may be used on all parts of your SureTrans Versa System. Harsh
abrasive cleaners (Ajax, Comet, etc.) may dull the finish.
Save these instructions for future reference.
Columbia Medical
13577 Larwin Circle
Santa Fe Springs, CA 90670
(310) 454-6612
Fax: (310) 305-1718
Email: info@columbiamedical.com
Visit us at www.columbiamedical.com
© 2005 Columbia Medical Mfg LLC
COLUMBIA MEDICAL MFG. LLC warrants this
product to be free of defects in material and
workmanship. Our obligation under this warranty is
limited to repair or replacement of any part or entire
unit at our option for a period of one year from date of
delivery to the original purchaser.
The warranty does not include cost of
inconvenience, property damage, misuse, abuse,
accident or similar incidents. The warranty will not
apply if product has been tampered with or repaired
by unauthorized individuals.
“This warranty gives
you specific rights which vary from state to state.”
