5
GENERAL INFORMATION
• If your wheelchair is not a transit model, it must not be used as a seat in a motor
vehicle.
1. This wheelchair has been dynamically tested in a forward-facing mode and rated for a maximum occupant weight
of 165 lb.
2. Refer to the wheelchair manufacturer’s Instruction for Use for setup and normal operations of the wheelchair.
3. The use of postural pelvic belts attached to the wheelchair is encouraged during travel. See Use of Postural Belts.
4. Belt restraints should be positioned on wheelchair occupants in accordance with WTORS (Wheelchair Tiedown
and Occupant Restraint Systems) and/or the wheelchair manufacturer’s instructions.
• The wheelchair has been dynamically tested in a forward-facing mode when loaded
with a crash-test dummy restrained with pelvic and shoulder belts. Both pelvic and
upper torso belts designed for use as crashworthy restraints in motor vehicles
should be used to reduce the risk of serious injuries to wheelchair occupants.
• Alterations or substitutions should not be made to the wheelchair or seating
system structural members, or to its parts and components, without consulting the
wheelchair manufacturer.
• This wheelchair should only be used in motor vehicles as described in these
instructions.
• Columbia Medical should be consulted for questions about using this wheelchair for
seating in a motor vehicle.
