DISPOSAL
Dispose of the machine in accordance with the waste disposal regulations in force in the country in which the machine is being used.
N.B.
: Figure 6 indicates the direction of rotation for tilting the squeegee towards the rear of the machine (
Fig.7
). Turn it in the opposite
direction to rotate the squeegee towards the front of the machine.
N.B.
: Check to ensure proper adjustment by looking at the instrument positioned on the squeegee body (
Fig.3
).
9. Once the adjustment has been completed, tighten the stopper knob (
Fig.8
).
MACHINE
NO. OF
BRUSH-
ES
CODE
TYPE OF
BRISTLES
Ø
BRIS-
TLES
Ø
BRUSH-
ES
NOTES
C85 2018 BS
NSC
1
447963
PPL
ø0.6
ø210x810 FRONT CYLINDRICAL BRUSH (WHITE COLOUR)
1
447964
PPL
ø0.9
ø210x810 FRONT CYLINDRICAL BRUSH (BLACK COLOUR)
1
447965
ABRASIVE
-
ø210x810 FRONT CYLINDRICAL BRUSH
1
449921
NATURAL
-
ø210x810 FRONT CYLINDRICAL BRUSH
1
449928
PPL
ø0.6
ø210x810 REAR CYLINDRICAL BRUSH (WHITE COLOUR)
1
449929
PPL
ø0.9
ø210x810 REAR CYLINDRICAL BRUSH (BLACK COLOUR)
1
449930
ABRASIVE
-
ø210x810 REAR CYLINDRICAL BRUSH
1
449931
NATURAL
-
ø210x810 REAR CYLINDRICAL BRUSH
1
427709
PPL
ø0.3
ø290
DISC BRUSH (BLUE COLOUR)
1
427710
PPL
ø0.6
ø290
DISC BRUSH (WHITE COLOUR)
1
427711
PPL
ø0.9
ø290
DISC BRUSH (BLACK COLOUR)
1
427712
ABRASIVE
-
ø290
DISC BRUSH
1
449920
NATURAL
-
ø290
DISC BRUSH
1
447713
-
-
ø290
PAD HOLDER
CHOOSING AND USING BRUSHES
POLYPROPYLENE BRUSH (PPL)
Used on all types of floors. Good resistance to wear and tear, and hot water (no greater than 50°C.). PPL is non-hygroscopic and therefore retains
its characteristics even when working in wet conditions.
ABRASIVE BRUSH
The bristles of this type of brush are charged with highly aggressive abrasives. It is used to clean very dirty floors. To avoid floor damage, work only
with the pressure strictly necessary.
BRISTLE THICKNESS
Thicker bristles are more rigid and are therefore used on smooth floors or floors with small joints.
On uneven floors or those with deep joints, it is advisable to use softer bristles which can enter the gaps more easily.
Remember that when the bristles are worn and therefore too short, they will become rigid and are no longer able to penetrate and clean deep down.
In this case, like with over-large bristles, the brush tends to jump.
25
