17
BRUSH CHOICE AND USAGE
POLYPROPYLENE BRUSH (PPL)
It is used on any type of floores and it has a good resistance to wearing and to hot water (not over 60 degrees).
PPL is not hygroscopic and so it keeps its features, also working on wet surfaces.
ABRASIVE BRUSH
The bristles are charged with very aggressive abrasives. It is used to clean very dirty floors. To avoid damages to
the floor we suggest to work with the light necessary pressure.
STEEL BRUSH
The bristles are in steel threads. It is used to scale floor that are resistant to abrasion or with large groove.
BRISTLES THICKNESS
The bristles with bigger thickness are the most rigid to use on smooth and with small interstices floor.
On an irregular or with marks or deep interstices floors we suggest smoother bristles which easier penetrate in
depth.
Keep in mind that when the bristles of the brush are consumed and too short, they became rigid and they are not
able to clean in depth, also because (as for the bristles too big) the brush tends to skip.
TABLE TO CHOOSE THE BRUSHES
Machine
N
Br.
Code Bristles
type
Bristles
Br.
Note
CS60 II
1
1
1
1
411703
411704
411705
414308
PPL
PPL + STEEL
TAMPICO BASSINA
TAMP. BAS. +
COPPER
0.6
0.7 + 0.5
-
-
265
265
265
265
