15
15
AT THE END OF THE WORK
At the end of the work, and before carrying out any type of maintenance:
1. Close the tap by means of the lever (1).
2. Raise the base by means of the pedal.
3. raise the squeegee by means of the lever (2)
2
1
4. Turn off the brush switch (3).
5. Turn off the suction motor switch (4).
WARNING!
If the battery indicator display is still switched on after you
have turned off the brush switch (3), this means the tap is turned on: turn
off the tap via the lever (1) to prevent detergent solution leaking out.
6. bring the machine to the place provided for draining the water
4
3
7. Grasp the tube on the rear of the machine
8. Remove the drainage cap and empty the tank.
WARNING!
This operation must be carried out wearing gloves to protect
against contact with dangerous solutions
9. Disassemble the brush and clean it with a jet of water (to disassemble the brush,
see “DISASSEMBLING THE BRUSH” below)
Summary of Contents for SCRUB 45D
Page 23: ......