background image

22

22

22

22

The undersigned company:

Industrial Cleaning Equipment Ltd.

Sauber House, Unit 3, Rushington Business Park

Chapel Lane, Totton, Hampshire, SO40 9AH

Declares under its sole responsibility that the products

FLOOR SCRUBBING MACHINES

mod. SCRUB 45D

comply with the requirements of the following Directives:

•  2006/42/EC: Machinery Directive.

•  2014/30/EC: Electromagnetic compatibility directive.

They also comply with the following standards:

•  EN 60335-1: Household and similar electrical appliances - Safety. Part 1: Generic standards.

• 

EN 60335-2-72: Household and similar electrical appliances. Part 2: Specific standards for automatic machines for 

floor treatment for commercial and industrial use.

•  EN 12100-1: Safety of Machinery - Basic concepts, general principles for design - Part 1: Basic terminology and 

methodology.

•  EN 12100-2: Safety of Machinery - Basic concepts, general principles for design - Part 2:  Technical principles.

•  EN 61000-6-2: Electromagnetic compatibility (EMC) - Part 6-2: Generic standards – Immunity for industrial environments.

•  EN 61000-6-3: Electromagnetic compatibility (EMC) - Part 6-3: Generic standards — Standard emission for residential, 

commercial and light-industrial environments.

• 

EN  62233:  Household  and  similar  electrical  appliances  -  Electromagnetic  fields  -  Methods  for  evaluation  and 

measurement.

The person authorised to compile the technical file:

Mr. Mark Bresnihan

Sauber House, Unit 3, Rushington Business Park

Chapel Lane, Totton, Hampshire, SO40 9AH

Chapel Lane, 01/02/2017

Industrial Cleaning Equipment Ltd.

Legal representative

Mark Bresnihan

EC DECLARATION OF CONFORMITY

Manufacturer:

COMAC S.p.A.

Via Maestri del Lavoro, n°13

c.a.p. 37059 - S. Maria di Zevio (VR) - Verona - Italia

Tel. +39 045 8774222 - Fax. +39 045 8750303

E-mail: 

com@comac.it

Web: 

www.comac.it

Mandatory:

Industrial Cleaning Equipment Ltd.

Sauber House, Unit 3, Rushington Business Park

Chapel Lane, Totton, Hampshire, SO40 9AH

Tel. 0800 389 3869 - Fax. 023 8042 8318

E-mail: 

info@ice-clean.com

Web: 

www.ice-clean.com

Summary of Contents for SCRUB 45D

























Reviews: