9
MACHINE PREPARATION
1.
HANDLING THE PACKAGED MACHINE
The machine is contained within specific packaging.
It is not possible to place more than two packages on top of each other.
The overall dimensions of the package are:
DIMENSIONS
A 1077
B 654
C 1424
A
C
B
2.
HOW TO UNPACK THE MACHINE
1.
Remove the outer packaging.
2.
Release the parking brake by removing the blocking pin (1).
3.
The machine is fixed to the pallet with wedges which block the wheels.
4.
Remove these wedges.
5.
Use a chute to get the machine down from the pallet, pushing it backwards. Do not assemble the
rear squeegee before unloading the machine, and avoid violently jolting the brush base. To assemble
the squeegee, read the “ASSEMBLING THE SQUEEGEE” paragraph.
6.
Keep the pallet for any future transport needs.
ATTENTION: if the product is delivered in cardboard containers, handle the
packed product with suitable lifting means that comply with the legal
requirements.
3.
HOW TO MOVE THE MACHINE
1.
To safely move the machine, you should use a pallet to support it (positioning wooden wedges to
block the wheels, as shown in the previous paragraph).
2.
Lower the squeegee (1) by means of the lever
3.
Lower the base (2) by resting the brushes, by means of the lever
1
1
2
