COMAC ULTRA 120 B-G, Use And Maintenance Manual

11

PURPOSE AND CONTENT OF THE MANUAL

TARGET GROUP

STORING THE USE AND MAINTENANCE MANUAL

ON CONSIGNMENT OF THE MACHINE

The aim of this manual is to provide customers with all the information needed to use the machine in the safest, most appropriate and 

most autonomous way. This includes information concerning technical aspects, safety, operation, downtime, maintenance, spare parts and 

scrapping. The operators and qualified technicians must carefully read the instructions in this manual before carrying out any operations on 

the machine. If in doubt about the correct interpretation of instructions, contact your nearest Customer Service Centre to obtain the necessary 

clarifications.

This manual is written both for operators and for qualified machine maintenance technicians. Operators must not perform operations that 

should be carried out by qualified technicians. The manufacturer is not liable for damages resulting from failure to comply with this veto.

The Use and Maintenance Manual must be stored in its special pouch close to the machine, protected from liquids and anything else that 

could compromise its legibility.

When the machine is consigned to the customer, an immediate check must be performed to ensure all the material mentioned in the shipping 

documents has been received, and also to check the machine has not suffered damage during transportation. If this is the case, the carrier 

must ascertain the extent of the damage at once, informing our customer service office. It is only by prompt action of this type that the missing 

material can be obtained, and compensation for damage successfully claimed.

IDENTIFICATION DATA

For technical assistance or to request replacement parts, always give the model, the version and the serial number (written on the relevant 

plate).

TECHNICAL DESCRIPTION

INTENDED USE

SAFETY

SERIAL NUMBER PLATE

The 

ULTRA 120

 is a floor scrubbing machine that can handle a wide variety of floors and types of dirt by using the mechanical action of two 

disc brushes and the chemical action of a water-detergent solution. As it advances, it collects the dirt removed and the detergent solution not 

absorbed by the floor. 

The machine must only be used for this purpose

.

This  scrubbing  machine  was  designed  and  built  for  the  cleaning  (scrubbing  and  drying)  of  smooth,  compact  flooring  in  the  commercial, 

residential and industrial sectors by a qualified operator in proven safety conditions. The scrubbing machine is not suitable for cleaning rugs 

or carpets.  It is only suitable for use in closed (or at least covered) places.

ATTENTION:

 the machine is not suitable for use in the rain, or under water jets.

IT IS FORBIDDEN 

to use the machine for picking up dangerous dusts or inflammable liquids in places with an explosive atmosphere. 

In addition, it is not suitable as a means of transport for people or objects.

Operator cooperation is paramount for accident prevention. No accident prevention programme can be effective without the full cooperation 

of the person directly responsible for machine operation. The majority of occupational accidents that happen either in the workplace or whilst 

moving are caused by failure to respect the most basic safety rules. An attentive, careful operator is most effective guarantee against accidents 

and is fundamental in order to implement any prevention programme. The manufacturer declines responsibility for any possible injury.

The serial number plate is located underneath the command panel. It 

indicates the general machine characteristics, in particular the serial 

number. The serial number is a very important piece of information 

and should always be provided together with any request for 

assistance or when purchasing spare parts.

INTRODUCTORY COMMENT

Any  floor  scrubbing  machine  can  only  work  properly  and  effectively  if  used  correctly  and  kept  in  full  working  order  by  performing  the 

maintenance operations described in the attached documentation. We therefore suggest you read this instruction booklet carefully and read it 

again whenever difficulties arise while using the machine. If necessary, remember that our assistance service (organised in collaboration with 

our dealers) is always available for advice or direct intervention.