5
Warning symbol:
Carefully read the sections preceded by this symbol meticulously following the instructions indicated for the safety of the
operator and the device.
Covered place symbol:
The operations preceded by this symbol must always be carried out in a dry, covered area.
Danger symbol (moving carriages):
Indicates that the packed product should be handled with suitable carriages that conform to legal requirements.
Danger symbol (harmful gases):
Indicates the risk of inhaling gases that could harm the operator's health.
Disposal symbol:
Carefully read the sections marked with this symbol for disposing of the appliance.
Recycling symbol:
Tells the operator to carry out the operations in compliance with environmental regulations in force in the place where the
appliance is being used.
Symbol of the open book with i:
Indicates the need to consult the instruction manual.
The descriptions contained in this document are not binding. The company therefore reserves the right to make any modifications at any time
to elements, details, or accessory supply, as considered necessary for reasons of improvement or manufacturing/commercial requirements.
The reproduction, even partial, of the text and drawings contained in this document is prohibited by law.
The company reserves the right to make any technical and/or supply modifications. The images are shown as a reference only, and
are not binding as to the actual design and/or equipment.
Symbol of the open book:
Tells the operator to read the user manual before using the device.
Symbol indicating the compulsory use of protective gloves:
Indicates that the operator should always wear protective gloves, to avoid the risk of serious injury to his hands from sharp
objects.
Symbol indicating a treading ban:
Informs the operator that it is forbidden to tread on machine components, as this could lead to serious injury.
Symbol indicating the compulsory use of tools:
Informs the operator of the need to use tools not included with the machine.
Symbol indicating the compulsory need to air the room while recharging the batteries:
Informs the operator that the room must be aired while the batteries are being recharged.
Symbol forbidding the switch-on of the endothermic engine in closed places:
It is forbidden to switch on the machine and power it via the endothermic engine in closed or poorly aired places.
Symbol forbidding refuelling while the endothermic engine is switched on (or anyway hot):
It is forbidden to refuel when the engine is still running or still hot.
Symbol indicating that it is forbidden to approach with naked flames or electronic devices during refuelling:
Informs the operator that naked flames or electric devices must not be taken near the machine during refuelling operations.
Symbol forbidding the use of water for putting out fires:
Informs the operator that it is forbidden to use water when attempting to put out a fire.
Danger symbol (corrosive substances):
The operator should always wear protective gloves to avoid the risk of serious injury to the hands caused by corrosive
substances.
Danger symbol (battery acid leakage):
Indicates the danger of leaking acid or acid fumes from the batteries while they are being recharged.
SYMBOLS USED IN THE MANUAL
Information symbol:
Indicates additional information for the operator, to improve the use of the device.
Summary of Contents for ULTRA 120 B-G
