34
WORK
If you have a combustion engine version, before starting to work you must:
1.
Make sure the recovery tank is empty, otherwise empty it completely
2.
Check the parking brake is engaged; if it is not, engage it by means of the lever (3) near the left side
of the seat
3.
Check the main machine switch (4) is set to "0"
4.
Check the fuel selector (5) is on LPG
5.
Turn the motor rotation adjustment knob (6) anticlockwise, as far as it will go
6.
Raise the seat mounting plate and connect the generator connector (1) to the electric system
connector (2)
7.
Check the fuel level; if it is low, top up the tank (as indicated in “FILLING THE FUEL TANK”)
8.
Open the tap (7) on the LPG cylinder
9.
Bring the seat mounting plate back to its working position, and sit on the seat
10.
Disengage the parking brake (3)
11.
Inject LPG into the system by repeatedly pressing the button (8) at least three times
12.
Turn the main switch key (4) clockwise by a quarter of a turn (to position 1). Bring the motor ignition
switch to the START position (turning the key further to the right), and keep it there until the motor
starts up; you can now release the key
WARNING: Do not use the starter for more than 5 seconds at a time. If the
motor does not start up, release the key and wait for 10 seconds before
making a new attempt.
13.
The green indicator light (9) will immediately come on, indicating that the main switch has been
enabled
14.
Turn the motor rotation adjustment knob (5) clockwise, as far as it will go
WARNING: No indicator light will be illuminated on the command panel (on the
instrument panel) until the combustion engine has reached its working speed.
15.
When the combustion engine is at full speed, the "work" screen of the control display will show the
generator charge status and the total operating time. When the machine generator is working
correctly, the upper line consists of 8 light indicators in the form of a battery. The bottom line indicates
the hours and minutes of functioning. The flashing “:” symbol indicates that the hour meter is counting
the machine functioning time
4
3
6
7
3
4
8
5
9
5
