41
DAILY MAINTENANCE
After cleaning, replace the squeegee on its support:
1.
Insert the squeegee right-hand pin (1) into the right-hand slot of the squeegee support (2), secure it
by means of the handwheel (3)
2.
Insert the squeegee left-hand pin into the left-hand slot of the squeegee support, secure it by means
of the handwheel
3.
Finally, insert the squeegee hose in its sleeve and secure it using the clamp.
WARNING: These operations must be carried out using gloves to protect
against contact with dangerous solutions.
46.
CLEANING THE SOLUTION TANK FILTER
Careful cleaning of the detergent/water solution filter ensures a better working capacity. Proceed as follows
for cleaning:
1.
Check the electric system connector is disconnected from the battery connector (for battery versions)
or from the generator connector (for the combustion engine version)
2.
Ensure the main switch key is set to “0”
3.
Ensure the parking brake is engaged
4.
Open the filler cap (1)
5.
Disconnect the clean water drain hose (2) from its housing at the rear of the machine, unscrew the
cap and empty the tank
6.
Close the water tap (3)
7.
Unscrew the filter (4) at the front of the machine
8.
Remove the internal filter cartridge and rinse everything thoroughly with running water
9.
Reassemble all the elements
WARNING: Before carrying out any type of maintenance, remove the keys
from the panel and disconnect the battery connector (for battery versions) or
from the generator connector (for versions with a combustion engine).
WARNING: These operations must be carried out using gloves to protect
against contact with dangerous solutions.
47.
CLEANING THE DEBRIS HOPPER AND HOPPER SUCTION FILTER
The thorough cleaning of the debris hopper and its filter will ensure better work results. Proceed as follows
for cleaning:
1.
Make sure the recovery tank is empty, otherwise empty it completely
2.
Check that the main switch of the machine is set to "0"
3.
Check the electric system connector is disconnected from the battery connector (for battery versions)
or from the generator connector (for the combustion engine version)
3
1
2
1
3
2
4
