62
CHOOSING AND USING THE BRUSHES
POLYPROPYLENE BRUSH (PPL)
Used on all types of floors. Good resistance to wear and tear, and hot water (no greater than 60°C). The Polypropylene brush is non-hygroscopic and
therefore retains its characteristics even when working in wet conditions.
NYLON BRUSH
Used on all types of floors. Excellent resistance to wear and tear, and hot water (even over 60°C). The nylon is hygroscopic and so tends to lose its
characteristics over time when working in wet conditions.
ABRASIVE BRUSH
The bristles of this type of brush are charged with highly aggressive abrasives. It is used to clean very dirty floors. To avoid floor damage, work only with the
pressure strictly necessary.
THICKNESS OF THE BRISTLES
Thicker bristles are more rigid and are therefore used on smooth floors or floors with small joints.
On uneven floors or those with deep joints, it is advisable to use softer bristles which can enter the gaps more easily.
Remember that when the bristles are worn and therefore too short, they will become rigid and are no longer able to penetrate and clean deep down. In this
case, like with over-large bristles, the brush tends to jump.
PAD HOLDER
The pad holder is recommended for cleaning shiny surfaces.
There are two types of pad holder:
1.
the traditional pad holder is fitted with a series of anchor points that allow the abrasive floor pad to be held and dragged while working
2.
the CENTRE LOCK type pad holder not only has anchor points, but also a snap-type central locking system in plastic that allows the abrasive floor
pad to be perfectly centred and held without any risk of it becoming detached. This type of holder is especially suitable for machines with several
brushes, where the centring of the grinding wheels is difficult.
TABLE FOR CHOOSING THE BRUSHES
Machine No. of brushes
Code
Type of bristles
Ø Bristles
Ø Brush
Length
Notes
ULTRA100
BS
1
405618
405619
405620
405621
405622
PPL
NYLON
ABRASIVE
UNIONMIX
ABRASIVE
1
1.2
1 + 0.5
1.5
280 978
Rear brush - black
Rear brush - black
Rear brush
Rear brush
Rear brush
1
405624
405625
PPL
NYLON
0.5
0.8
150 987
Front brush - white
Front brush - white
1
422189
422971
422972
422981
PPL
PPL
PPL
ABRASIVE
0.3
0.6
0.9
1
340 -
Side brush - light blue
Side brush - white
Side brush - black
Side brush
