41
WEEKLY MAINTENANCE
4.
Remove the right-hand cover (1) by unscrewing the nuts (2)
5.
Disconnect the quick release coupling (3) located behind the side cover, to prevent damage to the
coupling itself
6.
Remove the detergent tank (4) by unscrewing the nuts (5)
7.
Unscrew the detergent filler cap (6)
8.
Rinse the inside of the tank with a jet of water
9.
Refit all the parts.
ATTENTION: These operations must be carried out using gloves to protect
against contact with dangerous solutions
45. CLEANING THE SOLUTION TANK FILTER
Proceed as follows for cleaning:
1.
Ensure that the electrical system connector is disconnected from the battery connector
2.
Ensure that the main switch is in the “0” position
3.
Check the parking brake is engaged
4.
Ensure the solution tank is empty, otherwise empty it
5.
Close the water tap (1)
6.
Unscrew the detergent solution filter (2) located at the front of the machine
7.
Carefully clean the inside of the filter and the filter cartridge
3
2
1
5
4
6
1
2