InteliMains
NT
, SW version 3.2.0
InteliMains-NT-MCB-MGCB-3.2.0-Reference Guide.pdf,
©ComAp – April 2015
405
Description
This is the flashing alternative of the output
, i.e. the output flashes with
period 1s/1s while the output
14.2.1.39
Binary output: FltResButnEcho
Related FW
standard v3.1.0
Description
This output provides 1s pulse when:
Fault reset
button is pressed on the controller front panel or
Fault reset
button is pressed on any of external local/remote
terminals or
fault reset
command is received via communication line or
the input
14.2.1.40
Binary output: HrnResButnEcho
Related FW
standard v3.1.0
Description
This output provides 1s pulse when:
Horn reset
button is pressed on the controller front panel or
Horn reset
button is pressed on any of external local/remote
terminals or
horn reset
command is received via communication line or
the input
14.2.1.41
Binary output: StopButnEcho
Related FW
standard v3.1.0
Description
This output provides 1s pulse when:
Stop
button is pressed on the controller front panel or
Stop
button is pressed on any of external local/remote terminals or
stop
command is received via communication line or
the input