USER
MANUAL
MPD-1611291-A
EXACT-V2 High End Rack Modulator / Exciter
3/10/2017
MPD-1611291-A
Page 74/94
5.2
Embedded Web GUI Description
5.2.1
Requirements
To connect to the EXACT-V2 web interface, a web browser with Flash Player is
mandatory.
5.2.2
Connection to EXACT-V2
Using the web browser, the user will access the modulator by typing “
]”,
where [IP] is the IP address of the equipment. This address can be retrieved using the
front panel display menu: MANAGEMENT > Control IP Port > Add
To access any settings of the EXACT-V2 unit, a login is required. There are 3 logins:
o
User (Guest): Only monitoring of the equipment is allowed
o
Maintenance: Minor changes are allowed like test mode, input management,
precorrections, mute/unmute, clock and synchronization, etc.
o
Administrator: Complete access to the equipment
To login, the user will choose their access level, type the password and click on the
“Login” button. There is no password for the “Guest” account. Both the “Administrator”
and “Maintenance” accounts have the same password: admin
Depending on the granted access level, each parameter that can be modified by the
user will be followed by a small “tool” icon.
