Comau Robotics Product Instruction
18
GENERAL DESCRIPTION
2.
GENERAL DESCRIPTION
2.1 Introduction
The current manual gives detailed information about
RoboShop
program which is the
Interface on Personal Computer towards
C5GPlus
/
R1C
Control Units.
Starting from the current 2.0.0 version,
RoboShop
is a
multicontrol
tool, which means
that more than one Control Units can be connected at the same time in a
RoboShop
session.
RoboShop
can run on Microsoft
®
Windows
®
desktop operating systems, supported by
Microsoft
®
and requires administrator priviledges to be installed.
It should be installed on the PC running the installation program, from the dedicated
directory.
The following topics are described in this chapter:
–
–
–
–
How to get a full licence for RoboShop
–
Introduction to the User Interface
.
NOTE ABOUT THE LICENCE
Three types of licences are available for
RoboShop
program:
–
basic
licence
–
full
licence, which enables using the
Virtual Robot Controller
.
–
e.DO
licence, which enables
Roboshop
to simulate the
C5GPlus
system to
control an
e.DO
robot, both virtual and real.
If the user wishes to pass from the
basic
licence to the
full
licence, execute the steps
described in