USER MANUAL FOR COMFLEX-6900
ENU STATUS : 1-0-0
Copyright - refer to title page
Page 48
Comm. Setting
Figure 51: Function - Comm. Setting (SNMP)
IP Setting
Figure 52: Function - IP Setting
Note:
For remote monitoring, the IP Address must be set correctly according to the location IP of remote
connection. If there is more than one equipment is connected to the public network through the same
router, the router’s local IP
CANNOT
be set as 192.168.8.*.
License
Choose a way
Configure MU IP address
for remote monitoring of
MU
