INSTALLATION GUIDE FOR UHF DAS
ENU STATUS : 1-0-0
Copyright - refer to title page
Page 34
4
WEB GUI
The UHF PS DAS can be monitored and controlled via the WEB GUI; use the following guide to finish system
parameter setting and commissioning.
4.1
WEB GUI CONNECTION
Step 1:
Connect the
OMT port to the
PC RJ45 port OF MU with the supplied RJ45 cable to set up a physical
connection.
Step 2:
Open a
browser (suggested is the Firefox browser, display resolution is 1024×768), input Web GUI
IP address:
192.168.8.101
, click [Enter].
NOTE: DHCP and DNS are also available to login to the
Web GUI.
Figure 22: Input IP Address
Step 3:
Input
User Name: admin; Password
(default password:
admin
). Click [Log in].
Figure 23: Input User Name and Password