ONU User Manual
Page 29
Field
Description
The default is
AUTO
.
Enable Fullcone NAT
Enable to apply
Fullcone NAT
mode.
Dial on demand (with idle timeout timer)
Enable to
configure an
amount of time
that the
connection can
have no traffic
before it
automatically
disconnects.
In the
Inactivity
Timeout
field,
enter an amount
of time between 1
and 4320 minutes
that the
connection can
have no traffic
before it
automatically
disconnects.
PPP IP extension
Enable to allow
the gateway to
use PPPoE to get
the WAN IP and
pass it along to
the next device.
Use Static IPv4 Address
Enable to use a
static IPv4
address. Enter the
address in the
IPv4 Address
field.
Enable PPP Debug Mode
Enable to have
the gateway log
the PPP debug
information into
the log.
Bridge PPPoE Frames Between WAN and Local
Ports
If you have
selected PPPoE
