ONU User Manual
Page 35
Field
Description
effect after the ONU is
rebooted.
Subnet Mask
Enter the LAN subnet
mask.
Enable IGMP Snooping
Enable to apply IGMP
snooping and select one of
the following:
Standard Mode
Blocking Mode
Enable LAN side firewall
Enable to apply a firewall
to the LAN.
Disable DHCP Server
Select to disable DHCP
server to use a static IP
address.
Enable DHCP Server
Select to enable DHCP
server and use a dynamic
IP address range.
Start IP Address
If you have enabled DHCP
server, enter a start IP
address.
End IP Address
If you have enabled DHCP
server, enter an end IP
address.
Leased Time (hour)
Enter a time in hours for
the DHCP lease time. If
you enter
0
, the DHCP
lease will not expire.
Static IP Lease List (read-only)
If you are using static IP,
the static IP lease list
shows the MAC address
and static IP address.
Enable a
Remove
check
box for the corresponding
MAC and IP address to
remove.
Add Entries
Click to add a static IP
entry. The DHCP Static IP
Lease window opens.
Enter the
MAC Address
and
IP Address
in the
fields and click
