ONU User Manual
Page 44
Select
Incoming
from the
IP Filtering
submenu to open the Incoming IP Filtering Setup window; see
Figure 35.
Figure 35: Incoming IP Filtering Setup window
Table 30 describes the fields of the Incoming IP Filtering Setup window.
Table 30: Field Description
Field
Description
Filter Name (read-only)
The name of the outgoing IP traffic filter.
Interfaces (read-only)
WAN/LAN interfaces to apply this rule
IP Version(read-only)
Internet Protocol Version
Protocol (read-only)
The protocol of the filter.
SrcIP/PrefixLength (read-only)
The source address or IPv6 address
PrefixLength of the filter.
Source Port (read-only)
The source port number of the filter.
DstIP/PrefixLength (read-only)
The destination address or IPv6 address
PrefixLength
Dest Port (read-only)
The destination port number.
Remove
Enable the check-box to select the
outgoing IP filter to be removed from the
list.
Add
Click to add an outgoing IP filter; the Add
IP Filter -- Outgoing window opens.
Remove
Click to remove selected outgoing IP
filter.
If you have selected to Add an incoming IP filter, the Add IP Filter -- Incoming window opens; see
Figure 36.
