INSTALLATION GUIDE FOR RX-1839
ENU STATUS : 1-0-0
Copyright - refer to title page
Page 37
5.9
PROPERTY INFO.
5.9.1 EQUIPMENT ID
Equipment ID is to be configured after local commission has been completed, which includes Site ID, and
Site Sub ID.
Figure 34: Equipment ID
See the table below for configuration details of each parameter.
Table 7: Equipment ID Parameter
Item
Description
Site ID
Site ID is the unique equipment identification. It is a hexadecimal string of eight
characters in the range of [00000000~FFFFFFFF]. e.g. 00000000
Site Sub ID
Site Sub ID is used for Master-Slave System. It is the unique identification of each
Master/ Slave Unit and is a hexadecimal string of two characters in the range of
[00~FF].
For the system located with single equipment, the Site Sub ID should be 00.
For Master-Slave system, the Site Sub ID for Master Unit is 00, and the Site Sub ID
for each Slave Unit is represented in the range of [01~FE] in ascending order. e.g.
Master Site ID: 00, Slave Site ID: 01
5.9.2 FIRMWARE INFO.
Figure 35: Firmware Info.
