Taking down the tent
In case of rain, first remove the ground sheet, so that you can keep it clean and dry to store it.
Unfasten all tent pegs and guy lines. Store the awning poles.
Detach the awning front. If it is raining, you may wish to spread the front out over the beds to
keep them dry.
Remove the middle bar, slide the tent poles back in and fasten them with the clamp.
Use the middle stand to allow the tent to slowly lower. Zip the tunnels open a bit and pull out
the stand and the T-bar.
Unzip the tent about 40 cm from the trailer at the middle rear and at the front sides, so that
the zipper isn't under tension while lowering.
Fold the tent on the trailer and attach the black band over the fold-out bed. Now you can pull
the bed back over and lay the legs flat.
For the Comfort model, put up the support pole for the slatted base:
Attach the cover all the way around. The elastic should be fastened to all of the notches,
starting at the loop on the end.
