Loading without expanding the tent
Open the rear door and open the tension clips on the inside of the trailer 2x.
Raise the tent unit and load or unload the trailer. The gas springs will raise the tent unit and
hold it up. Heavy items should be place above or in front of the axle as much as possible.
Then, let the tent unit come down, close both tension clips and then the one on the
door. Always leave the door open when raising and lowering the tent unit to keep your fingers
from getting caught.
Use as a luggage trailer
Open the rear door and open the tension clips on the inside of the trailer 2x. Disconnect the
gas springs after removing the cotter pin. Remove the black caps from the hinges on the hitch
side and remove the nut and bolt. Now you can lift the tent unit off the trailer.
