COMBI International Corporation • 199 Easy St. • Carol Stream, IL 60188 • www.combi-intl.com
Customer Service 1-800-992-6624 • 10:00 a.m. - 5:00 p.m. Central Time • Monday - Friday
- 6 -
Using and Adjusting the Waist Belt
WARNING
Position the crotch belt between your
baby’s legs. Fasten both waist belts to
the buckles on each side of the crotch
belt. Be sure you hear a “click” on
both sides. Make sure the seat belt is
securely fastened by pulling it. The
seat belt should remain buckled when
baby is in the Activity Rocker
™
.
CAUTION
Even when the waist belt is fastened, be careful not to let
the child slip out.
Never use waist belt that are torn or frayed.
1. To release the waist belt, squeeze the sides of the buckle and
pull to release.
2. The waist belt can be adjusted as your child grows. Thread the
waist belt through the male buckle to hold your child securely
and comfortably.
Removing/Adjusting the Seat Cushion
To remove the seat cushion
Note: The metal hooks have a small opening through which the seat cushion strap can be
removed. See diagram.
1. Unthread the straps located on each side of the armrest through the small opening of the
metal hooks.
2. Look under the seat cushion and unthread the straps that are attached to the frame behind the waist belt. Also
remove the straps behind the crotch belt that are attached to the footrest. Note: This step will be easier if you recline
the seat cushion to the fully reclined position.
3. Pull the top of the seat cushion and remove from the top of the frame.
To attach the seat cushion
Reverse the procedure for removing the seat cushion. Make sure that all straps and metal hooks are
fastened correctly.
