background image

Failure to follow the information in these instructions, and on the car 
seat labels, can result in injury or death to a child due to the child 
striking the vehicle's interior during a sudden stop or crash.

  Use only in a rear-facing position when using this infant car seat in 

  a vehicle. Serious crippling injury or death can result if infant faces 
  front of vehicle.

  Use only with children who weigh between 5 and 22 pounds 

  (2.3 and 10 kg) and whose height is 29 inches or less (74 cm).

  Discontinue use when infant’s weight exceeds 22 lb. (10 kg).

  Discontinue use of infant car seat when top of the infant's head 

  is above the top of the car seat backrest.

  Snugly adjust car seat harness around infant. Infant MUST be 

  secured by harness system at all times, both when car seat is 
  used in vehicle, and when car seat is used outside of vehicle.

  Fall Hazard: Handle MUST be locked in carry position before lifting or

  carrying car seat. DO NOT lift or carry car seat by anti-rebound bar.

  If used with car seat base, secure base with the LATCH anchorage 

  system if available in the vehicle or with a vehicle seat belt as shown 
  in this manual.

  If using the infant car seat without the base, secure with a vehicle  

  seat belt as shown in this maual.

  LATCH belt or vehicle seat belt MUST stay tightly adjusted around 

  the car seat at all times.

  Secure the base and car seat, or infant car seat only, to the vehicle 

  even when not occupied. Unsecured items may injure other    
  occupants in a crash.

  DO NOT allow any re-use of this car seat after a crash unless crash  

  and car seat meet ALL conditions in "Re-use after a crash" section 
  in this manual.

  DO NOT use the infant car seat if it is damaged, has missing parts, 

  or missing instructions.

  Register your car seat with the manufacturer.

1

Section 1 - Warnings

2

Section 1 - Warnings

WARNING

DEATH or SERIOUS INJURY can occur

Summary of Contents for Centre DX 8074 Series





























Reviews: