26
Removing Seat Base Pad, Seat Back Pad and
Headrest Pad:
- If the seat back is attached to the seat
base, remove seat back, see ”Seat Back
Assembly” section.
To Remove Seat Base Pad:
- Unhook elastic from seat base.
- Gently slide and pull seat pad off of seat base
armrests and air circulation vents.
To Remove Seat Back Pad:
- Unsnap snaps on pad from back of seat pad.
- Gently slide and pull pad off of seat back.
To Remove Headrest Pad:
- Unhook elastic from bottom of headrest.
- Unhook elastic tabs on pad from back of
headrest.
- Gently slide and pull pad off of headrest.
- Remove egg shock from pocket inside
headrest pad before washing pad.
Reverse above steps for replacing pads.
NOTE:
Openings in front of seat base pad
MUST be placed behind flange of air
circulation vents.
Cleaning Seat Base Pad, Seat Back Pad and
Headrest Pad:
- Hand wash in cool water and mild soap.
Roll in towel to remove excess water and
lay flat to dry.
Cleaning Shell:
- Wipe with mild solution of soap and water.
Avoid wetting labels.
- Rinse with clean water.
- Never use “household” detergents or solvents.
Section 11 - Care and Cleaning
8970 (EN) 030305.qxd 3/3/05 4:21 PM Page 27