Section 10 - Attachment of Car Seat to Base
25
Removal Of Car Seat From Base:
Pull Car Seat Release Handle and
lift car seat from base
(fig. a)
.
Attaching Car Seat To Base:
Check that there are no objects on top of base or between base and
car seat that will prevent proper latching of car seat.
- Check lower anchor belt is routed or stored properly.
1
(fig. a)
Car Seat
Release
Handle
1
2
2
1
1
• Base MUST be used with car seat for infant over 22 pounds
(10 kg).
• Always lift car seat to be sure it is securely locked into base.
WARNING
- DEATH or SERIOUS INJURY can occur
Section 10 - Attachment of Car Seat to Base (continued)
26
With child facing the rear of the vehicle, lower
car seat into base and push down on car seat
to lock car seat into base
(fig. b)
.
Test to be sure car seat is locked in base.
Lift on car seat at top of seat back and
at child’s feet
(fig. c)
.
Carry Handle MUST be kept in the
carry position (see “Carry Handle
Operation” section)
(fig. c)
.
(fig. c)
1
2
1
2
3
4
Handle in
carry position
(fig. b)
2
