Combilift Ltd.
C4000-C5000XL O&S Manual
3-2
C4000-OM-EN-08
3.3: Moving
Because the Combilift is capable of multi directional travel it is important to be
aware of how the truck moves and how to drive it in a safe manner.
Moving Forward
Select forward on the directional control lever.
Depress the brake/inching pedal fully
Look around to make sure your way is clear
Release the parking brake and sound the horn
Slowly release the brake/ inching pedal
As the truck starts to move, depress the accelerator pedal to increase
speed
To stop depress the inching pedal fully.
(
Note: If the machine is already in sideward mode, wait for the wheels to
realign. Once the wheels are in position continuer as per the instructions)
Note
The truck will NOT start unless the directional control lever is in the neutral
position.
Note
The starter must not be operated continuously for more than 30 seconds. If
the engine does not start, return the key to the ‘OFF’ position and wait 10
seconds before trying again.
Note
When the machine is started the wheels will remain in whatever position
they were in when the machine was stopped until the operator selects a
direction of travel on the directional control lever
Important
The Combilift has two different modes of travel. These are
:
Normal Mode: The front wheels are parallel to the platforms.
Steering is performed by the Rear Swivel.
Sideward Mode: The front wheels are at 90° to the platforms.
Steering is performed by the Front Swivels.
https://www.forkliftpdfmanuals.com/
