Components & Controls
26
C2500CB-OM-EN-16
Warning
DO NOT adjust the seat when the truck is in operation. Stop the truck and
apply the park brake before making any adjustments to the seat.
Report any malfunction of the seat immediately. Maintenance may only be
carried out by a competent authorised person.
DO NOT place or allow any objects to fall within the moving area of the seat.
Check that all setting stops are correctly engaged before starting the truck.
Loads – other than the operators weight – must not be placed on the seat.
Warning
Not wearing the seatbelt or operating with a damaged seatbelt can result in
injury to the operator.
DO NOT operate the truck unless the seatbelt is fastened across the top of
the lap.
Note
If the truck has the seat belt switch option fitted the drive is disabled if the
seatbelt tongue is not properly fastened in the seatbelt buckle.
Operator’s Seat
A correctly functioning seat that has been adjusted to suit the height, weight and
posture of each individual operator is essential to the operator’s health.
The seat must be correctly adjusted before use and before each change of operator
so that the steering wheel, pedals and hydraulic controls can be comfortably reached
while the operator has their back resting against the seat backrest.
The angle of the steering column should be adjusted when the seat is being adjusted
to achieve optimum comfort. See ‘Adjusting the Steering Column’.
