15
www.combisteel.com
8.2 Common Fault
Symptoms
Causes
Solutions
Power is connected and heating
indicator is on, but it does not
heat up.
1. The thermostat is defective.
2. At least one of the heating
elements burns out.
1. Replace the thermostat.
2. Replace the burnt-out heating
element.
Connect the power and rotate the
thermostat, the heating indicator
illuminates, but temperature
keeps rising without control.
1. The thermostat is
malfunctioning.
1. Replace the thermostat.
Power is connected and heating is
normal, but the indicator is not
on.
1. The indicator is defective.
1. Replace the indicator.
The indicator is not on and the
appliance does not heat up.
1. Power supply is abnormal or
power is disconnected.
2. The fuse is burnt out.
1. Check the power supply and
connection to make it supply
normally.
2. Replace the fuse.
Aforementioned troubles are just for reference. If any failure occurs, please stop using and inform the
professional technicians to check and repair.
Summary of Contents for CUBE EC1
