Comcater FC54-E, Instruction Manual

                                                                            INSTRUCTIONS FOR THE USER 

25 

6) RESINS REGENERATION OF THE WATER SOFTENER
(only for machines with built-in water softener) 

The regeneration of the water softener resins is completely automatic. The 
flashing of the regeneration lamp 

“H4”

 indicates the need to regenerate the 

resins, in any case the presence of some opaque spots on the glasses will 
show that it is necessary to start the regeneration. 
This operation has to be carried out with full tank. 
First of all, make sure that in the designated tank container “S” there is some 
regeneration salt (1kg is enough for about 5 regenerations). 
Close the front door and press the button 

“S4”

 for approx. 3sec. 

After that the lamp 

“H4”

 remains switched on for 20 minutes (during this 

operation the machine cannot be used). 
The end of which will be indicated by the switching off of the 

"H4"

 lamp. 

Ø 

(For further use , first switch off the machine).

At this point switch off the machine, to empty the tank (to see page 21) and 
the equipment is ready to be used.