POH LTF-UL-2019 C42B Issue 1 • Pilot Operating Handbook
POH LTF-UL-2019 C42B Issue 1
Page 46 of 84
Step 6
Attention! - Now immediately
1.
Insert mounting bolts into the front wing spar bracket
2.
Insert mounting bolts into the rear wing spar bracket
3.
Insert toggle bolt into the square cross-frame spar to secure the wing
support
4.
All three bolts must be secured with
the ring pins!
5. Lift the wing and check that the wing support is fixed by the
toggle bolt really reliable!
Repeat Step 1 to 6 for the other wing.
Remove any aileron locks used.
Step 7
Attach right and left aileron push rods to the see-saw connection.
Carefully assure that the slide mechanism of the special ball-joint
connectors is in completely closed position and there is no vertical
play.
Step 8
Left and right flaps connection must be locked. Ensure both locking
bolts are snapped in.
Step 9
Fasten wing center section fairing
Step 10
With Posi / Strobes installed, re-establish electrical connection
from fuselage to wing.