3.6.2
Automatic Privacy
You can make a line private or non-private. In the private mode, a station has exclusive use of a line
during a call. Lines are private unless you re-program them and make them non-private.
Private Or Non-Private Lines
Description:
Use this programming feature to set which lines are private or non-private.
To Program:
1. Dial 40.
“PRIVACY RELEASE”
2. Select line ports to be non-private (LED On = Non Private)
— Line port 1–14 = Dial 01–14 or Press A1–A14
—Line port 15, 16 = Dial 15, 16 or press B1, B2
—Line port 17–24 = Dial 17– 24 or press HOLD then press A1–A8.
3. Dial
✳
for configuration mode.
To change setting, repeat procedure and make different selection.
Automatic Privacy Release
Description:
You can arrange for individual station to automatically release privacy while on certain
lines. With this arrangement, other stations can join that particular station whenever it is
on the privacy release line.
To Program:
1. Dial 54.
“STA/LINE CONFIG.”
2. Dial 4.
“PRIVACY RELEASE”
3. Select line ports:
—Line port 1–14 = Dial 01–14 or Press A1– A14.
—Line port 15, 16 = Dial 15, 16 or press B1, B2.
—Line port 17–24 = Dial 17– 24 or press HOLD then press A1–A8.
4. Dial # when all line ports are selected.
5. Select station ports to be programmed
—Station 10–57 = Dial 10–57, or press C10–C57.
6. Dial
✳
when all station ports are selected
—OR—
dial
✳ ✳
for next station/line feature
—OR—
dial
✳ ✳ ✳
for configuration mode.
To change setting, repeat procedure and make different selection.
IMI66–132
DSU II Digital Telephone System
3 – 36 Programming The DSU II System
Summary of Contents for DSU II
Page 31: ......
